![Pump tube PP for mixing and pumping](https://cdn.lutz-pumpen.de/media/image/44/1b/ff/Pumpwerk-PP_Mischen-Pumpen_600x600.jpg)
Immersion depth: 1000 mm
Type of seal : sealless (DL)
Description:
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and thus save important resources.
- also available in special immersion depths from 200 - 2500 mm
- Pump tube equipped with Lutz original handwheel
- Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Two functions (pumping and mixing) in one unit
- No leakage in case of inclined position or moving of the pumping unit
- High mixing and conveying capacity for thorough homogenization
- Switching between the pumping and mixing functions takes place without disturbing the ongoing operation, which is made possible by a small lever on the handwheel
Pump tube (material): | PP (polypropylene) |
Impeller (material): | PP (polypropylene) |
Static seal (material): | no seals in contact with the medium |
Mechanical seal (material): | no seals in contact with the medium |
Bearing (material): | ETFE / PTFE |
Drive shaft (material): | Edelstahl (1.4571) |
Flow rate (up to l/min.): | 95 |
Delivery head (up to m wc): | 25 |
Temperature of medium (up to °C): | 50 |
Density (up to kg/dm³): | 1.9 |
Viscosity (up to mPas): | 800 |
Type of impeller: | Radial-flow impeller |
Seal type: | Sealless (SL) |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 50 |
Connecting threads: | 1 1/4" |
Type: | MP PP 50/41-L DL SS |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter