![Pump tube HC](https://cdn.lutz-pumpen.de/media/image/c9/9b/6d/Pumpwerk_HC_Hastelloy_C_Lutz-09-23_600x600.png)
Immersion depth: 1000 mm (sealless)
Description:
The Lutz Pump tube (HC) is suitable for thin-bodied, inflammable and highly corrosive chemicals. Depending on the application different Motors are available which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- also available in special immersion depths from 200 - 2500 mm
- Pump tube equipped with Lutz original hand wheel
- used in areas of fire and disaster control
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Approved according to ATEX directive 2014/34/EU, category 1/2
- Highly resistant carbon and ETFE - Shaft bearing
- Maintenance without special tools
- Seal modules of the seal-less (DL) pump are interchangeable
Pump tube (material): | HC (Hastelloy C) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Static seal (material): | FPM (fluororubber) |
Bearing (material): | ETFE / Kohle |
Drive shaft (material): | Hastelloy C (2.4610) |
Flow rate (up to l/min.): | 243 |
Delivery head (up to m wc): | 15 |
Temperature of medium (up to °C): | 120 |
Density (up to kg/dm³): | 1.4 |
Viscosity (up to mPas): | 650 |
Type of impeller: | Axial-flow rotor |
Seal type: | Sealless (SL) |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 42 |
Connecting threads: | 1 1/4" |
Explosion protection: | Yes |
Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
Type: | HC 42-R-DL |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter