![Pumpwerk für Fasspumpe B2 Battery (PVDF)](https://cdn.lutz-pumpen.de/media/image/f0/e7/5e/Pumpwerk_B2_Battery_PVDF_600x600.jpg)
Immersion depth: 500 mm
Type of seal: sealless (DL)
Description:
The Lutz Pump tube (PVDF) is suitable for thin-bodied, concentrated acids and alkalis. With the appropriate Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electric motor B2 Vario or the battery version B2 Battery.
- Media examples: Chloric acid, chromic acid, sulphuric acid. Nitric acid, hydrofluoric acid, etc.
- For the withdrawal of small quantities from hobbocks, canisters and barrels
- Suitable for Motor B2 Vario and B2 Battery
Features & Advantages
- No lubricants and therefore no contamination of the pumped medium
- Optimized Drum emptying
- Maintenance without special tools
- Universally resistant ETFE/PTFE shaft bearing
- Sealless design (DL) conditionally safe to run dry
Pump tube (material): | PVDF (polyvinylidene fluoride) |
Impeller (material): | PVDF (polyvinylidene fluoride) |
Static seal (material): | no seals in contact with the medium |
Mechanical seal (material): | no seals in contact with the medium |
Drive shaft (material): | Hastelloy C (2.4610) |
Flow rate (up to l/min.): | 80 |
Flow rate with nozzle (up to l/min): | 45 |
Delivery head (up to m wc): | 8 |
Temperature of medium (up to °C): | 90 |
Density (up to kg/dm³): | 1.6 |
Viscosity (up to mPas): | 400 |
Type of impeller: | Axial-flow rotor |
Seal type: | Sealless (SL) |
Immersion length (mm): | up to 500 mm |
Immersion tube diameter (up to mm): | 32 |
Connecting threads: | 1" |
Type: | PVDF 32-R-DL |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter