![Eccentric screw pump tube B70V-D Industry](https://cdn.lutz-pumpen.de/media/image/01/3f/f3/Exzenterschneckenpumpwerk_B70V_D_600x600.jpg)
Flow rate: 12 l/min .
Drive shaft: Cardan shaft (GW)
Seal type: Mechanical seal (GLRD)
Note: With Ex-approval
Description:
The B70V-D 12.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- PTO shaft versions also available in special immersion depths of 500 - 2000 mm
- Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials.
Features & Advantages
- Uniform volume flow
- Easy and fast cleaning
- Gentle, low-pulsation product conveying
- Smooth running and low wear
- Large selection of robust and powerful drive motors
- Approved according to ATEX Directive 2014/34/EU, Category 1/2
Pump tube (material): | Edelstahl (1.4571/1.4404) |
Static seal (material): | FPM (fluororubber) |
Mechanical seal (material): | Kohle, CrMO-Guss, FPM |
Drive shaft (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | PTFE (Polytetrafluorethylen) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Flow rate (up to l/min.): | 12 |
Delivery head (up to bar)*: | 6 |
Temperature of medium (up to °C): | 140 |
Viscosity (up to mPas): | 100000 |
Type of impeller: | Gelenkwelle (hochviskose Medien) |
Seal type: | Mechanical seal (MS) |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 54 |
Statorgröße: | 12.1 |
Connecting threads: | 1 1/2" |
Explosion protection: | Yes |
Type of drive: | Three phase |
Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
Type: | B70V-D |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter