No results were found for the filter!
Ex-protection
Base meter LM10
See details
Description: The basic meter is required for decentralized installation and external data evaluation. The individual modules (basic counter, operating unit, relay module, etc.) can be installed separately from each other if there are large distances between the measuring and control points or if the installation locations in the system are difficult to access. Data...
Ex-protection
Base meter UN10
See details
Description: The basic meter is required for decentralized installation and external data evaluation. The individual modules (basic counter, operating unit, relay module, etc.) can be installed separately from each other if there are large distances between the measuring and control points or if the installation locations in the system are difficult to access. Data...
Ex-protection
Base meter VA10
See details
Description: The basic meter is required for decentralized installation and external data evaluation. In case of larger distances between measuring and control point or difficult to access installation locations in the plant, the individual modules (basic meter, operating unit, relay module, etc.) can be installed separately from each other. The data transmission between the...
PP
Drum adapter
See details
for the for Eccentric screw pump B70V
Description: The Drum adapter is needed to fix the pump in the barrel opening. It this prevents the pump from tipping over when empty Drum. Properties & Advantages Material made of PP / St 37
Stainless steel
Installation flange
See details
for the Eccentric screw pump B70V Ø 52-54 mm
Description: The mounting flange is attached to the B70V pump and a mating flange. The flange is welded directly to the Pump tube. Material: Stainless steel (1.4571) Features & Advantages DN 80 / PN 10 according to the standard: DIN 2576 Pumping station diameter Ø 52-54 mm
Ex-protection
Stainless steel
Foot strainer
See details
for the Eccentric screw pump B70V
Description: The foot strainer can be used for the Eccentric screw pumps. By attaching the strainer to the pump base, coarse contaminants can be kept away from important components such as the drive. To be plugged onto the pump foot Features & Advantages Avoidance of impurities in the Pump tube by filtering them out Material: Stainless steel (1.4571)
Ex-protection
Stainless steel
Outlet bend
See details
for Eccentric screw pumps
Description: The discharge elbow allows liquids to be transferred or filled directly into another container. They are available in aluminium and stainless steel and are screwed onto the pump outlet. Nominal width: DN 25 Features & Advantages Enables the quick and direct transfer of liquids Union nut (1 1/2")
Suspension device
See details
for Eccentric screw pumps B70V
Description: The suspension device is used for safe storage of the B70 pumps. The pumps are thus protected and their utility value is increased at the same time. exactly adapted to the Eccentric screw pumps B70V Features & benefits Increases the value in use Protection against dropping of the Eccentric screw pump
Ex-protection
Stainless steel
Clamping device
See details
for Eccentric screw pump B70V
Description: The clamping device is for fastening the Eccentric screw pump B70V in open and thick-walled drums and containers. suitable for a wide range of pumping station diameters Features & Advantages Material made of stainless steel
Brass
Bypass valve
See details
for Eccentric screw pumps B70
Description: The bypass valve is recommended when using a closure valve. Shut-off valve for Nozzles, ball valve, etc. Features & Advantages Material brass / stainless steel Opening pressure: 2,5 bar (brass version) / 5 bar (stainless steel version) Connection type: 1 1/2"
Ø 14 mm
Aluminium
Hub, motor side
See details
for B70V 12.1 to 75.1
Description: If the motor is supplied by the customer, the hub must also be ordered in accordance with the shaft diameter. Aluminium material Features & Advantages Shaft diameter: Ø 14 mm / Ø 19 mm / Ø 24 mm / Ø 28 mm
Ex-protection
1,6 - 2,5 A
Motor protection switch
See details
for Motor B70V (Ex)
Description: The motor protection switch is equipped with thermal and electromagnetic releases and is mounted to the Motor with the matching support bracket. a suitable carrying bracket for mounting on the pump is required Features & Benefits Marking: II 2G Ex de IIC T6 Protection class: IP 66 Current ratings: 1.6 - 6.3 A