No results were found for the filter!
Support bracket
for Motor MA II and ME II
Description: The carrying handle makes it easier to lift the pump out of or immerse it in the drums or containers. In the case of an explosion-proof drive motor, the explosion protection switch is attached to the support bracket for Motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gears Features & Advantages No heavy...
Connection cable
Description: The connection cable is for extending the cable for the universal motors (2, or 3-wire) and the three-phase motors (4-wire). depending on the requirements, the cable can be supplied in the desired length
Cekon plug
for three-phase motors B4/GT and centrifugal...
for three-phase motors B4/GT and submersible centrifugal pump B6 Description: The Cekon - plug is suitable for three-phase geared motors B4/GT and submersible centrifugal pump B6 5-pole plug Features & Advantages Amps: 16 A
Ex-protection
AC
CEAG
Ex-plug
for Motor ME II and for B70V-SR (Ex)
Description: The CEE - round plugs are suitable for the rotary commutators (three-phase current) and the electric motors (alternating current) and are used in the hazardous areas or environments. splash-proof Features & Advantages Certification: II 2G Ex db eb IIC T6 Gb Protection class: IP 65 Three-phase (3-pole) or alternating current (5-pole)
Voedsel
Explosiebeveiliging
DN 25 (1")
Universele chemieslang
voor chemische alkaliën, voedingsmiddelen en...
Omschrijving: De slang is geschikt voor zuivere chemicaliën, cosmetica, fotografische chemicaliën, verf en lijm, was- en reinigingsmiddelen, hygiëneproducten, maar ook voedingsmiddelen en luxe voedingsmiddelen. Hij voldoet aan de FDA en USP Class VI. De slang is elektrisch geleidend en kan dus ook worden gebruikt in explosiegevaarlijke omgevingen. ook verkrijgbaar in...
Ex-protection
DN 25 (1")
max. 16 bar
Solvent hose
for highly flammable hydrocarbons
Description: The Hose is suitable for a wide range of commercially available solvents. The Hose is electrically conductive so that it can also be used in explosive environments. Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50 electrically conductive Properties & advantages Operating pressure up to max. 16 bar Colour coding: blue Complies with EU regulations...
Voedsel
Explosiebeveiliging
DN 25 (1")
Speciale chemische slang FEP
voor zeer zuivere producten
Omschrijving: De slang is geschikt voor alle gangbare media, maar ook voor zeer zuivere producten. Hij kan worden gebruikt als druk- of zuigslang en voldoet aan de eisen van FDA en USP Class VI. ook verkrijgbaar in speciale lengtes op aanvraag Nominale breedte: DN 19 / DN 25 / DN 32 / DN 38 / DN 50 Eigenschappen & voordelen Werkdruk tot max. 16 bar kleurcodering:...
Ex-protection
AC
CEAG
Ex socket
for Motor ME II and for B70V-SR (Ex)
Description: The CEE - socket are suitable for the rotary commutators (three-phase current) and the electric motors (alternating current) and are used in the hazardous areas or environments. splash-proof Features & Advantages Certification: II 2G Ex db eb IIC T6 Gb Protection class: IP 65 Three-phase (3-pole) or alternating current (5-pole)
Filter pressure reducer
for Lutz Compressed air motors and Diaphragm...
Description: Filter pressure reducer with pressure gauge for setting the operating pressure. Inlet pressure max. 16 bar Ambient temperature max. 60°C Features & Advantages Filter element 5 µm, Cellpor and 40 μm, sintered bronze Housing made of zinc die-cast and aluminium Diaphragm and seals made of NBR
Clutch
for the compressed air supply of the Double...
Description: The coupling is self-closing and is screwed into the maintenance unit or filter pressure reducer. Material: Brass Features & Advantages Nominal widths 7.2 and 10 mm Connection type external thread 3/8"
Brass
7.2 mm
3/8" MALE
Plug-in nipple
for the compressed air supply of the air motors...
Description: The brass push-in nipple is required for connection to the compressed air hose, thus enabling a trouble-free compressed air supply. Material: Brass Properties & Advantages Nominal widths: 7.2 and 10mm
7.2 mm
DN 13 (1/2")
Insertion sleeve
for compressed air supply
Description: The plug-in grommet is required for connection to the coupling in order to be able to connect the maintenance unit to the compressed air hose. Material: Brass Features & Advantages Nominal widths 7.2 and 10 mm