No results were found for the filter!
PPO
1 1/4" IT
FPM Gasket
Drum pump connection
made of plastic for Flow Meter ST 10 and SL10
Description: The drum pump connection is required to connect the Flow Meter ST 10 / SL10 to a Drum- and container pump. For the connection to the Flow Meter LM10 / UN 10 to a Drum pump the connection with the conductive barrel pump connection in the PPS version is necessary. Materials PPO / PPS Features & Advantages Connection: 1 1/4" IG to 2" AG Seals: FPM and FPM - FEP
Ex-protection
Stainless steel
1 1/4" - 1 1/4" IG
Drum pump connection
made of stainless steel for Flow Meter VA 10 Ex
Description: The barrel pump connection is required to connect a Flow Meter VA 10 with a Drum- and container pump. Material Stainless steel Features & Advantages Connection: 1 1/4" IT - 1 1/4" IT to 1 1/4" ET Seals: PTFE
PP
DN 25 x 1" AG
Screw-in hose nozzle
for the Double diaphragm pump 1"
Description: The screw-in hose nozzle enables the direct connection of hoses to the pressure or suction connection of the Double diaphragm pump. Materials PP / stainless steel Features & Advantages Connection type: DN 25 x 1" AG
PP
DN 50 x 2" IG
Hose connection
for DMP 2" and B70-V
Description: The hose connector connects the delivery hoses to the discharge/suction port of the Double diaphragm pumps or the Nozzle. When using a Double diaphragm pump, either a suitable reducing nipple or a threaded flange must be used in addition to the hose connection. special connections are available on request Features & Advantages Materials PP / PVDF / stainless...
PP
1" AG x 1 1/4" AG
Reducing nipple (product side)
for the Double diaphragm pump 1 "and the barrel...
Description: The reducing nipple allows the connection of two different threaded sockets. special connections are available on request Properties & Advantages Materials: PP / PVC / PVDF / stainless steel (1.4571) / brass Connection 1" AG to 1 1/4" AG
Stainless steel
1/2" AG
Hexagonal double nipple (product side)
stainless steel for the double diaphragm pumps...
Description: The reducing nipple allows the connection of two different threaded sockets. special connections are available on request Properties & Advantages Material: stainless steel (1.4571) Connection: 1/2" AG / 1" AG / 1 1/2" AG / 2" AG
PP
DN 40 x 1 1/2" AG
Threaded flange
for the Double diaphragm pump 1 1/2"
Description: The threaded flange is used to connect individual components to the Double diaphragm pump. The flange includes the necessary screws and gaskets. special connections are available on request Properties & Advantages Materials: PP / PVDF / Alu / Stainless steel (1.4571) Connections: DN 40 on 1 1/2" AG / DN 38 on 1 1/2" AG
PP
DN 50 x 2" AG
Threaded flange
for the Double diaphragm pump 2"
Description: The threaded flange is used to connect individual components to the Double diaphragm pump. The flange includes the necessary screws and gaskets. special connections are available on request Properties & Advantages Materials: PP / PVDF / Alu / Stainless steel (1.4571) Connection: DN 50 on 2" AG
1000 mm
1" AG
Suction pipe
made of stainless steel (Niro)
Description: The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as in the case of immersion of a hose. Material: Stainless steel (1.4571) Properties & Advantages Outer tube diameter 41 mm Tube length from 1000 - 1200 mm Connections: 1 " AG and 1 1/4" AG
1000 mm
1 1/4" MALE
Suction pipe
made of polypropylene (PP)
Description: The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as in the case of immersion of a hose. Material: PP Properties & Advantages Outer tube diameter 41 mm Tube length from 1000 - 1200 mm Connection: 1 1/4" AG
Stainless steel (1.4571)
Suction basket
for the suction hose
Description: The suction strainer is attached to the matching suction hose. It prevents coarse impurities in the pump's flow. Material: Stainless steel (1.4571) and PA Features & Advantages Connection: 1 1/4" AG Avoidance of impurities
Thread M6
Vibration damper set
Damping with exemption
Description: Vibration damper kit provides damping of vibrations such as vibrations, shocks and shocks. The set consists of 4 vibration dampers including mounting material. Thread M6 / M8 Features & Advantages Thread standard M6 / M8 according to standard DIN 13-1