Flow rate: 120 l/min .
Drive shaft: Cardan shaft (GW)
Seal type: Mechanical seal (GLRD)
Note: No Ex-approval
Description:
The B70V 120.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for highly viscous, pasty and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus conserve important resources.
- available in special immersion depths of 500 - 2500 mm on request
- Connection to the discharge nozzle of the pumping station is made with a Tri-Clamp
- Media examples: highly viscous mineral oils, resins, emulsions, paints and many other thick materials.
Features & Advantages
- uniform volume flow
- easy and fast cleaning
- gentle, low-pulsation product conveying
- smooth running and low wear
- large selection of robust and powerful drive motors
Estación de bombeo (material): | Edelstahl (1.4571) |
Sello estático (material): | FPM (caucho fluorado) |
Cierre mecánico (material): | WC, WC, FPM |
Eje de transmisión (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | NBR hell (Nitrilbutadienkautschuk) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Caudal (hasta l/min): | 120 |
Cabezal de entrega (hasta un bar máximo)*: | 6 |
Temperatura del fluido (máx. °C): | 80 |
Viscosidad (hasta mPas): | 120000 |
Forma de la rueda de transporte: | Gelenkwelle (hochviskose Medien) |
Tipo de sello: | Cierre mecánico (GLRD) |
Profundidad de inmersión (mm): | 1100 |
Statorgröße: | 120.1 |
Druckstutzen (DN): | 50 |
Tipo de propulsión: | Corriente trifásica |
Tipo: | B70V |
* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite. ** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador